The A1060 H14 aluminum is a commercially pure aluminum alloy in the 1xxx series. With a minimum aluminum content of 99.60%, it offers excellent formability, high corrosion resistance, good electrical conductivity, and a bright surface finish. The H14 temper (strain hardened to 1/4 hard) provides a balanced combination of strength and workability, making it one of the most popular choices for architectural panels, chemical equipment, reflectors, and general sheet metal fabrication.
As a direct manufacturer, we supply high-quality A1060 H14 aluminum sheet, plate, and coil with stable mechanical properties, precise dimensional tolerance, and full mill test certificates. This guide covers everything buyers need to know — from chemical composition and hardness to real-world applications, price factors, and how to order.
What Is A1060 H14 Aluminum?
A1060 H14 aluminum refers to aluminum alloy 1060 in the H14 temper. The "1060" indicates a minimum aluminum purity of 99.60%. The "H14" temper means the material has been strain hardened (cold worked) and then partially annealed to achieve approximately 1/4 hard condition.
This combination delivers:
• Good strength compared to O temper
• Excellent formability compared to H18 or H24
• Superior corrosion resistance
• Bright, attractive surface finish
• Non-toxic and food-safe properties
Because of these characteristics, aluminum 1060 h14 is widely used in industries that require both workability and moderate strength without the need for heat treatment.
Chemical Composition of A1060 Aluminum
The high purity of A1060 is the foundation of its excellent corrosion resistance and formability.
Element | Content (%) |
Aluminum (Al) | ≥ 99.60 |
Iron (Fe) | ≤ 0.35 |
Silicon (Si) | ≤ 0.25 |
Copper (Cu) | ≤ 0.05 |
Manganese (Mn) | ≤ 0.03 |
Magnesium (Mg) | ≤ 0.03 |
Zinc (Zn) | ≤ 0.05 |
Titanium (Ti) | ≤ 0.03 |
Others (each) | ≤ 0.03 |
The very low levels of copper, manganese, and magnesium ensure outstanding corrosion resistance and electrical conductivity.
Mechanical Properties of A1060 H14 Aluminum
The aluminum 1060 h14 temper offers a balanced mechanical profile suitable for bending, stamping, and light drawing.
Property | O Temper (Annealed) | H14 Temper | H18 Temper | H24 Temper |
Tensile Strength (MPa) | 60 – 95 | 95 – 125 | 125 – 155 | 110 – 140 |
Yield Strength (MPa) | 20 – 35 | 70 – 100 | 110 – 130 | 80 – 110 |
Elongation (%) | 25 – 35 | 4 – 8 | 2 – 5 | 5 – 10 |
Hardness (HB) | 18 – 22 | 28 – 35 | 38 – 45 | 32 – 38 |
Density (g/cm³) | 2.70 | 2.70 | 2.70 | 2.70 |
Aluminum 1060 hardness in H14 temper typically falls between 28–35 HB, making it suitable for applications that require moderate rigidity while still allowing cold forming.
A1060 H14 Aluminum Specifications
We produce A1060 H14 aluminum in a wide range of sizes to meet different customer requirements.
Parameter | Details |
Alloy | A1060 (AA1060 / EN AW-1060) |
Temper | H14 (Standard), also available in O, H12, H18, H24 |
Thickness | 0.5 mm – 6.0 mm (commonly 0.8–3.0 mm) |
Width | 500 mm – 2200 mm |
Length | 500 mm – 6000 mm (or coil form) |
Surface | Mill finish, bright finish, anodized, painted |
Edge | Sheared edge, deburred |
Flatness | High flatness, no significant warping |
MOQ | 500 kg (negotiable for common sizes) |
Packaging | Wooden pallet with waterproof paper, interleaved paper between sheets |
All dimensions can be customized according to your drawings.
Applications of A1060 H14 Aluminum
A1060 H14 aluminum is valued for its excellent workability, corrosion resistance, and attractive appearance. Common applications include:
Building and Architectural Decoration
• Curtain wall panels
• Ceiling panels and decorative strips
• Roofing sheets
• Advertising boards and signs
Chemical and Industrial Equipment
• Chemical storage tanks
• Heat exchangers
• Pipe insulation jacketing
• Pressure vessel linings
Lighting and Reflectors
• Lamp reflectors
• LED lighting fixtures
• Solar reflector sheets
Other Applications
• Nameplates and labels
• Kitchen utensils and appliances
• Electronic chassis and covers
• Road traffic signs
Its bright surface makes it especially popular for products where aesthetics are important.
Key Features and Advantages of A1060 H14 Aluminum
Feature | Benefit |
High Purity (≥99.6% Al) | Excellent corrosion resistance and electrical conductivity |
H14 Temper | Balanced strength and formability, suitable for bending and stamping |
Good Workability | Easy to cut, bend, stamp, and weld |
Bright Surface | Attractive appearance, good for anodizing and painting |
Lightweight | Density only 2.70 g/cm³, reduces structural load |
Non-toxic | Safe for food contact and medical applications |
Excellent Corrosion Resistance | Performs well in outdoor and chemical environments |
Recyclable | 100% recyclable without quality loss |
A1060 H14 vs Other Tempers and Alloys
Grade / Temper | Aluminum Content | Strength | Formability | Typical Use |
A1060 O | ≥99.60% | Low | Excellent | Deep drawing, spinning |
A1060 H14 | ≥99.60% | Medium | Very Good | Architectural panels, signs, general sheet metal |
A1060 H18 | ≥99.60% | High | Fair | Stiff parts, less forming required |
A1060 H24 | ≥99.60% | Medium-High | Good | Slightly stiffer applications |
1050 H14 | ≥99.50% | Medium | Very Good | Similar uses, slightly lower purity |
1100 H14 | ≥99.00% | Medium | Good | General industrial use |
Aluminum 1060 h14 is often chosen when moderate strength and excellent surface quality are needed without sacrificing too much formability.
A1060 H14 Aluminum Price
The price of A1060 H14 aluminum is influenced by several factors:
• Current LME aluminum ingot price
• Thickness and width (thinner and wider usually cost more per kg)
• Order quantity (larger orders receive better pricing)
• Surface treatment (anodized or painted commands a premium)
• Packaging and certification requirements
As a direct manufacturer, we offer competitive factory pricing with transparent cost breakdown. Please send us your detailed requirements (thickness, width, quantity, and destination) for an accurate quotation within 24 hours.
Why Choose Us as Your A1060 H14 Aluminum Supplier?
• Direct factory with over 20 years of production experience
• Advanced rolling, leveling, and shearing equipment
• Strict quality control with chemical and mechanical testing
• Full mill test certificates (MTC) provided with every order
• Custom sizes and tempers available
• Stable supply capacity of 5,000+ tons per month
• Professional export team experienced in sea, air, and courier shipping
• Competitive pricing with no middleman markup
We serve customers in Southeast Asia, Middle East, Europe, South America, and Africa.
Our Export Countries
We regularly export A1060 H14 aluminum to the following markets:
Asia | Middle East | Europe | Americas | Africa |
Vietnam | UAE | Germany | USA | Nigeria |
Thailand | Saudi Arabia | UK | Brazil | South Africa |
Indonesia | Qatar | Poland | Mexico | Kenya |
Malaysia | Kuwait | Netherlands | Chile | Egypt |
How to Order A1060 H14 Aluminum
1. Send us your specifications (alloy, temper, thickness, width, quantity)
2. We provide a detailed quotation within 24 hours
3. Confirm order and arrange deposit
4. We produce and inspect the material
5. Pack and ship with full documentation
6. Provide tracking information and after-sale support
Frequently Asked Questions
What is aluminum 1060 h14 used for?
It is widely used for architectural panels, signs, chemical equipment, lighting reflectors, and general sheet metal fabrication where moderate strength and good formability are required.
What is the hardness of aluminum 1060 h14?
The typical Brinell hardness of aluminum 1060 h14 is 28–35 HB.
What is the difference between A1060 H14 and H18?
H14 is 1/4 hard with better formability, while H18 is full hard with higher strength but lower ductility. H14 is more suitable for bending and stamping.
What is the difference between aluminum 1060 h14 and h24?
H24 has slightly higher strength than H14 because it is closer to half-hard. H14 offers better formability, while H24 is used when more rigidity is needed.
Do you provide material test reports?
Yes. We provide mill test certificates (MTC) showing chemical composition, mechanical properties, and dimensions with every shipment.
Contact Us Today for a Competitive Quote
Whether you need standard A1060 H14 aluminum sheet or custom sizes, we are ready to support your project with reliable quality, competitive pricing, and fast delivery.
Send us your requirements today. We reply within 24 hours.
