Henan zhongxin aluminum 5052 aluminum plate is a hot-selling product

Hot-selling Product 5052 Aluminum Plate Standard Hardness And Application Field

2019.12.04

Hot-selling product 5052 aluminum plate standard hardness and application field, Henan zhongxin aluminum direct manufacturers for your answer!

5052 aluminum sheet

Henan zhongxin aluminum 5052 aluminum plate is a hot-selling product, exported to countries around the world, the thickness of the range: 0.2-0.8mm, width: 100-2650mm.Can be used for aircraft fuel tank, shutter, refrigerator liner and panel.

Henan zhongxin aluminum popular products 5052 aluminum plate quality characteristics:

1. 5052 aluminum plate has high corrosion resistance.

It is an alloy containing 0.25% chromium and 2.5% magnesium.It is widely used for its formability and durability.It has high fatigue and moderate static strength.It can be used in Marine environments without worrying about corrosion.The metal also has excellent thermal conductivity and low density, which is common in other aluminum alloys.Its fatigue performance and endurance limit is excellent.The endurance limit is 125 MPa under H34 tempering and 115 MPa under H32 tempering.

2.5052 aluminum plate can be hardened by cold work.

Aluminum plate manufacturers can harden the alloy by cold working when needed.5052 aluminum plates cannot be hardened by heat treatment.Compared to the 5005 alloy plate, this grade of aluminum has better resistance in the Marine environment.It also has excellent corrosion resistance when used under weak alkaline conditions.5052 aluminum plate has a protective surface film, making the metal corrosion resistant.When damage occurs, a quick reaction between aluminum and oxygen repairs it.If the film cannot be repaired, it may rapidly corrode the base metal.To prevent this, the metal can be anodized, which thickens the protective surface film.

3.Aluminum plate for heat treatment.

Not only that, but also heat treatment of 5052 aluminum plates, which should be done at 653 degrees Fahrenheit;The cooling rate and time at this temperature are not important.Stress relief is rarely required, but can be done at 428 degrees Fahrenheit.When worrying about strength loss, stress relief should be used.This metal is also easy to process and weld.

Henan zhongxin aluminum provides a number of specifications model 5052 aluminum plate, global export, high quality products, long-term concessions, welcome to order!